STM32F103C8T6 blue pillSKU ST1001

STM32

STM32F103C8T6 blue pill

₹234

01 — About

What it does

The STM32F103C8T6 Blue Pill is a powerful ARM Cortex-M3 development board offering superior performance to Arduino boards at a fraction of the cost. With 72MHz clock, 64KB flash, and rich peripherals, it is ideal for advanced embedded systems.

Key features

  • ARM Cortex-M3 32-bit processor at 72MHz
  • 64KB flash memory and 20KB SRAM
  • 37 GPIO pins with multiple alternate functions
  • Rich peripherals including 3 USART, 2 I2C, 2 SPI, CAN, USB
  • 12-bit ADC with 10 channels
  • 4 timers with PWM, input capture, and output compare
  • Low cost with professional-grade performance

Good to know

  • Operates at 3.3V – use level shifters for 5V sensors
  • Install STM32 core in Arduino IDE or use STM32CubeIDE
  • USB bootloader may need initial flash via ST-Link or serial
  • Some boards have incorrect USB pull-up resistor – check schematic
  • ST-Link V2 recommended for debugging

02 — Datasheet

Specifications

14
Processor
ARM Cortex-M3 32-bit
Clock Speed
72 MHz
Flash Memory
64 KB
SRAM
20 KB
Operating Voltage
3.3V
Input Voltage
5V via USB or 2.0-3.6V direct
GPIO Pins
37
ADC
12-bit, 10 channels
UART
3
I2C
2
SPI
2
USB
Full-speed device
Timers
4
Debug
SWD