Servo Tester 5v ModuleSKU 11024

Accesories & Cables

Servo Tester 5v Module

₹99

01 — About

What it does

The Servo Tester 5V Module generates PWM signals to test and center servo motors without a microcontroller. It features manual adjustment and automatic sweep modes for servo calibration, RC setup, and standalone servo testing.

Key features

  • Manual mode – adjust position with knob
  • Neutral mode – centers servo to 90°
  • Automatic sweep mode – continuous back-and-forth
  • Works with all standard servos
  • 5V operation
  • Compact module
  • No programming needed

Good to know

  • Power from BEC/ESC or separate 5V supply
  • Can damage servo if forced beyond mechanical limits
  • Use neutral mode to find center before mounting servo horn
  • Auto mode useful for testing servo speed and range
  • Does not replace proper servo control in final application

02 — Datasheet

Specifications

07
Input Voltage
4.8V – 6V
Output Signal
PWM (1-2ms pulse)
Frequency
50Hz (20ms period)
Modes
Manual, Neutral, Auto
Connector
3-pin servo header
Indicator
LED
Dimensions
25mm x 20mm