Mini360 ADJ MP1584 Buck ConverterSKU 6029

ESP Boards & Shields

Mini360 ADJ MP1584 Buck Converter

₹69

01 — About

What it does

The Mini360 ADJ MP1584 Buck Converter is a compact and high-efficiency DC-DC step-down (buck) voltage regulator module based on the MP1584EN switching regulator IC. It accepts an input voltage from 4.5V to 28V DC and provides an adjustable output voltage from 0.8V to 20V DC. With high conversion efficiency of up to 96% and a compact form factor, it is ideal for Arduino, ESP32, Raspberry Pi, robotics, IoT, embedded systems, and battery-powered applications.

Key features

  • Based on the MP1584EN high-frequency buck converter IC
  • Input voltage range: 4.5V to 28V DC
  • Adjustable output voltage from 0.8V to 20V DC
  • Up to 3A peak output current (recommended ≤2A continuous)
  • High conversion efficiency up to 96%
  • Compact Mini360 design for space-constrained applications
  • Integrated thermal shutdown and over-current protection
  • Suitable for battery-powered and embedded electronic projects

Good to know

  • Always adjust and verify the output voltage before connecting your load.
  • The output voltage must always be lower than the input voltage.
  • For continuous currents above 2A, additional cooling or airflow is recommended.
  • Observe correct input and output polarity during installation.
  • Do not exceed the maximum input voltage of 28V DC.

02 — Datasheet

Specifications

12
Module Type
DC-DC Step-Down (Buck) Converter
Controller IC
MP1584EN
Input Voltage
4.5V to 28V DC
Output Voltage
0.8V to 20V DC (Adjustable)
Output Current
Up to 3A Peak (Recommended ≤2A Continuous)
Conversion Efficiency
Up to 96%
Switching Frequency
1.5MHz
Voltage Regulation
Adjustable via Multi-turn Potentiometer
Operating Temperature
-40°C to +85°C
Protection Features
Thermal Shutdown, Over-current Protection
Module Dimensions
Approximately 22 × 17 × 4 mm
Weight
Approximately 2g