SKU 9018ESP Boards & Shields
ESP32 Expansion Board 30 pins
₹200
01 — About
What it does
The ESP32 Expansion Board 30 Pins is a versatile breakout and base board designed for the narrow 30-pin ESP32 DevKit V1 development module. It breaks out all GPIO, power, and ground pins to clearly labeled headers, making it easy to connect sensors, actuators, and peripheral modules for IoT, robotics, and embedded development projects.
Key features
- Designed for ESP32 30-pin DevKit V1 development modules
- Breaks out all GPIO pins to labeled 2.54mm headers
- Selectable 3.3V or 5V output via onboard jumper
- GVS interface (Ground, Voltage, Signal) for easy sensor wiring
- Supports Type-C USB, Micro USB, and DC jack power input
- Onboard power-on LED indicator
- Onboard BOOT and RESET buttons for firmware flashing
- Compact, breadboard-friendly layout
- M3 mounting holes for secure installation
- Easy integration with sensors, relays, displays, and industrial modules
Good to know
- Compatible only with narrow 30-pin ESP32 DevKit V1 boards (header spacing 27.94mm / 1 inch); not suitable for 38-pin ESP32 boards.
- The ESP32 development module is not included unless stated otherwise.
- Set the voltage jumper correctly (3.3V or 5V) before connecting external modules.
- Do not power the board through multiple input sources simultaneously.
- Verify header spacing on your ESP32 board before purchase to ensure compatibility.
- Use BOOT and RESET buttons as needed during firmware upload.
02 — Datasheet
Specifications
- Compatibility
- ESP32 DevKit V1 / ESP-WROOM-32, 30-pin narrow version
- Number of Pins
- 30 Pins
- GPIO Access
- All I/O pins of the ESP32 development module
- Header Pitch
- 2.54 mm
- Output Voltage
- 5V or 3.3V (jumper selectable)
- Power Input
- USB Type-C, Micro USB, DC Jack
- DC Jack Input Range
- 6.5V – 16V DC
- Onboard Regulator
- 5V, 1A
- Indicators
- Power-on LED
- Buttons
- BOOT and RESET
- Board Dimensions
- 65mm x 55mm (varies by version)
- Mounting Dimensions
- 60mm x 50mm, M3 screw holes