0.96 Inch OLED Display Module (SPI/I2C, 4-Pin, Blue) for Arduino, ESP32 & Raspberry PiSKU 10003

Display Board & LED

0.96 Inch OLED Display Module (SPI/I2C, 4-Pin, Blue) for Arduino, ESP32 & Raspberry Pi

₹199

01 — About

What it does

The 0.96 Inch OLED Display Module (SPI/I2C, 4-Pin, Blue) is a high-contrast, self-illuminating display requiring no backlight. It provides crisp text and graphics via I2C using only 2 pins, making it ideal for compact projects.

Key features

  • 128×64 pixel resolution in 0.96-inch diagonal
  • No backlight required – OLED self-illuminating
  • High contrast ratio (>10000:1)
  • I2C interface (4-pin: VCC, GND, SCL, SDA)
  • Wide viewing angle (>160°)
  • Low power consumption
  • Compact size for portable devices

Good to know

  • Use Adafruit_SSD1306 or u8g2 library for Arduino
  • I2C address is usually 0x3C – try 0x3D if not detected
  • OLED burn-in possible – implement screen timeout or pixel shifting
  • No backlight needed but pixels consume power when lit
  • Some modules have both I2C and SPI – verify jumper settings

02 — Datasheet

Specifications

09
Display Type
OLED (Monochrome)
Resolution
128 x 64 pixels
Display Color
Blue/White/Yellow-Blue
Interface
I2C (SPI on some models)
I2C Address
0x3C or 0x3D
Operating Voltage
3.3V – 5V (module regulated)
Controller
SSD1306
Viewing Angle
>160°
Dimensions
27mm x 27mm x 4mm